Clinker

Geography glossary

Also called: Clinker substitution · Topic: Manufacturing Industries of India: Location and Distribution · NCERT: Beyond NCERT

Meaning

Clinker is the main ingredient of cement. It forms as hard, grey lumps when limestone and clay (which supplies silica) are baked at very high heat in a kiln, a large oven. The clinker is then ground into a fine powder with a little gypsum, and that powder is cement. When the limestone is heated, it breaks down into lime and carbon dioxide (CO₂). This CO₂ is called a process emission, because it comes from the chemical change itself and not from the fuel. Using clean power does not stop it. Clinker substitution means replacing part of the clinker with other materials such as fly ash (ash left after burning coal) or steel slag (waste from steel furnaces). This gives blended cement and cuts the CO₂ released for every tonne of cement.

Example

Cement plants at Satna-Katni in Madhya Pradesh and Chandrapur in Maharashtra are built close to limestone deposits, because the bulky limestone is used to make clinker on site. Many plants also mix fly ash from coal-based thermal power stations into their cement, so they need less clinker.

Don't confuse with

  • Cement: clinker is only the middle product. Cement is the finished powder you get after grinding clinker with gypsum, and in blended cement, with fly ash or slag as well.
  • Energy emissions: these come from burning coal or other fuel to heat the kiln, and clean power can reduce them. Clinker's process emissions come from the limestone itself, so only using less clinker, or capturing the CO₂, can reduce them.

Read more