Common-mode failure
Also called: Redundancy without independence · Topic: Remote Sensing, GIS and GNSS · NCERT: Beyond NCERT
Meaning
A common-mode failure happens when one fault knocks out both the main system and its backup at the same time. Engineers add a backup, called redundancy, so that a second path can take over if the first one breaks. The backup only helps if it is truly separate from the main path. If both paths share one part, such as a single connector, wire or power line, one fault in that part cuts both paths together. This is why it is also called "redundancy without independence". It matters for satellites because they cannot be repaired after launch, so a single shared weak part can end a whole mission.
Example
ISRO launched the NavIC satellite NVS-02 from Sriharikota, Andhra Pradesh, in 2025. Its main and backup signal paths ran through the same connector. A contact in that connector came loose in both paths, so the firing signal never reached the oxidiser-line pyro valve (a one-time valve opened by a small explosive charge) of its orbit-raising engine. The engine could not fire, and the satellite was stuck in its transfer orbit instead of reaching its working orbit.
Don't confuse with
- Single point of failure: this is one part with no backup at all, so if it fails the system stops. In a common-mode failure a backup does exist, but it shares a weak part with the main path, so it fails at the same moment.