Pyro valve
Also called: Pyrotechnic valve, Explosive valve · Topic: Remote Sensing, GIS and GNSS · NCERT: Beyond NCERT
Meaning
A pyro valve (pyrotechnic valve) is a valve that works only once. A small explosive charge inside it is fired by an electric signal, and the blast moves a part that permanently opens a pipe. Some types close a pipe instead. In spacecraft, pyro valves keep propellant (fuel and oxidiser, the chemical that lets fuel burn) sealed in its tanks during launch. Later they release it into the engine lines, for example the oxidiser line of the orbit-raising engine. This engine lifts a satellite from its transfer orbit into its working orbit. If a pyro valve fails to fire, the engine gets no propellant and the satellite cannot reach its working orbit.
Example
In 2025, ISRO's NVS-02 navigation satellite was launched from Sriharikota, Andhra Pradesh. The drive signal never reached the pyro valve on its oxidiser line. ISRO traced this to a loose connector contact in both the main and the backup paths. The orbit-raising engine could not fire, so the satellite stayed stuck in its transfer orbit. To avoid the same fault, NVS-03 (October 2026) flew with three pyro valves already open. This setup was cleared only after vibration and shock testing.
Don't confuse with
- Latch or solenoid valve: an electrically worked valve that can open and close many times during a mission. A pyro valve acts once and cannot be reset.