MeitY Revises Public Procurement (Preference to Make in India) Order 2020, For Six IT Hardware Products To Promote Domestic Manufacturing
FlashcardsQuick reviseKey facts. One by one.Start →In this note
- At a Glance
- Why in the News
- Background & Evolution
- Core Static Facts
- Multi-Dimensional Analysis
- Recent Developments (last 12–18 months)
- Prelims Hooks
- Why a Signed Form Is the Weakest Point of the Rule
- The Costliest Part of a Laptop Still Comes From Abroad
- Will Government Pay More for Local Hardware?
- How the Buyer Rule Works With the PLI Subsidy
- Why India Can Do This Without Breaking WTO Rules
- What MeitY Should Do Before the Rule Starts
- Anchors for Answers
- Mains Relevance
- Related Topics to Study Next
- NCERT Concepts to Revise
- Common Errors / Trap Areas
1. At a Glance
- On 20 November 2026, MeitY revised how Domestic Value Addition (DVA) is calculated for 6 IT-hardware products that government buyers purchase under the Public Procurement (Preference to Make in India) Order, 2017 (PPP-MII). [1]
- The new method is process-oriented and based on the Bill of Materials (BoM). It gives credit for each manufacturing step done in India, not just final assembly. It also adds weightage for R&D, Indian design and IPR. [1]
- Why it matters for UPSC: it brings together industrial policy (Make in India), public procurement under the GFR, electronics manufacturing, and how "local content" is defined in a WTO-sensitive way. All of these are recurring GS-III themes.
2. Why in the News
- MeitY has replaced its 07 September 2020 DVA methodology for six products: Desktop/All-in-One PCs, Laptop PCs, Thin Clients, Servers, Computer Monitors and Interactive Flat Panel Displays (IFPDs). [1]
- The revised method takes effect six months after it is published in the Official Gazette. [1]
- The stated aims are to promote domestic manufacturing, indigenous capability and employment. [1]
3. Background & Evolution
- 2017: The Government of India issued the PPP-MII Order, 2017 under Rule 153(iii) of the General Financial Rules (GFR), 2017. It is an enabling provision to promote domestic value addition in public procurement. [2]
- 28 May 2018: The PPP-MII Order was amended. [2]
- 07 September 2020: MeitY notified the earlier DVA methodology for IT-hardware products. [1]
- 20 November 2026: MeitY revised that methodology for the 6 products, moving to a process-based BoM approach. [1]
- The basic logic: preference in procurement only works if there is a clear test of what counts as "local". The DVA methodology is that test. [1]
4. Core Static Facts
| Item | Fact |
|---|---|
| Parent framework | Public Procurement (Preference to Make in India) Order, 2017 [1][2] |
| Legal basis | Rule 153(iii), GFR 2017 (an executive order, not an Act) [2] |
| Issuing ministry of the 2019 PIB release on the Order | Ministry of Commerce & Industry [2] |
| Nodal ministry for this revision | MeitY [1] |
| Products covered | 6: Desktop/AIO PC, Laptop PC, Thin Client, Server, Computer Monitor, IFPD [1] |
| Methodology superseded | MeitY notification of 07 Sep 2020 [1] |
| Effective date | 6 months after Official Gazette publication [1] |
| Basis of computation | Bill of Materials (BoM), process-oriented [1] |
| Activities credited | SMT-based mainboard assembly; domestic bare PCB; RAM and SSD assembly, testing and packaging; display assembly; domestic chassis; power module; final assembly and testing [1] |
| R&D | In-house R&D in India gets "adequate" weightage [1] |
| Design / IPR | Indian product design and IPR get "additional" weightage [1] |
| Compliance | Self-certification in a standardised format, with objective verification where required [1] |
Key terms
- DVA: the share of a product's value created in India. It is the value-based measure of "local content". [1]
- SMT (Surface Mount Technology): the process of mounting components onto the mainboard. The new method counts it as domestic value addition. [1]
- Thin Client: a lightweight computer that depends on a server. It is one of the 6 notified products. [1]
5. Multi-Dimensional Analysis
Economic
- The rule is designed to reward deeper manufacturing (PCB, SMT, memory, displays, power modules) rather than "screwdriver" final assembly. [1]
- Government is a large, steady buyer of PCs, servers and panels, so this preference creates assured demand for domestic manufacturers.
- The stated goals include employment. [1] The main risk is higher costs for buyers if domestic supply chains are still thin.
Scientific / Technological
- Weightage for in-house R&D, Indian design and IPR pushes firms from assembly towards design and ownership of technology. [1]
- Crediting RAM/SSD assembly and testing links the rule to wider semiconductor and electronics ambitions. [1]
Legal / Governance
- The PPP-MII Order is an executive instrument under the GFR, not a statute. [2]
- Self-certification with verification balances ease of doing business against the risk of false declarations. [1]
- A standardised format makes it harder for individual procuring officials to apply local-content checks inconsistently. [1]
Administrative
- The 6-month lead time gives industry time to reorganise BoMs and supply chains before the rule applies. [1]
- Challenges: verifying BoM-level claims across many tiers of suppliers, and building the capacity of procuring entities to do so.
Geopolitical / Strategic
- Domestic sourcing of servers and computing hardware for government use reduces dependence on imports and supply-chain risk in critical digital infrastructure.
- Preference policies have to be weighed against India's trade commitments. India is not a party to the WTO Government Procurement Agreement, which gives it room for such preferences. (Analytical point; verify against WTO GPA membership before quoting.)
6. Recent Developments (last 12–18 months)
- 20 Nov 2026: MeitY revised the DVA methodology for 6 IT-hardware products. It applies 6 months after Gazette publication. [1]
- No other development in the last 12–18 months could be confirmed from whitelisted sources within the search limit.
7. Prelims Hooks
- The PPP-MII Order dates from 2017. The 2020 date belongs to MeitY's DVA notification (07 Sep 2020). [1]
- The PPP-MII Order was issued under Rule 153(iii) of GFR 2017. [2]
- The PPP-MII Order was amended on 28.05.2018. [2]
- The revised DVA method covers 6 IT-hardware products. [1]
- IFPD (Interactive Flat Panel Display) and Thin Client are among the notified products. [1]
- The revised method takes effect six months after Official Gazette publication. [1]
- DVA is computed on a Bill of Materials (BoM) basis. [1]
- SMT-based mainboard assembly is a recognised value-adding activity. [1]
- Domestic sourcing of bare PCB earns DVA credit. [1]
- RAM and SSD assembly, testing and packaging earn DVA credit. [1]
- In-house R&D in India gets "adequate" weightage. Design and IPR get "additional" weightage. [1]
- DVA is self-certified by manufacturers in a standardised format, with verification where required. [1]
- The revision was issued by MeitY, not DPIIT and not the Department of Expenditure. [1]
8. Why a Signed Form Is the Weakest Point of the Rule
- The rule trusts the seller's own word first
- Under self-certification, the manufacturer itself declares its DVA (the share of value made in India). It is checked objectively only "where required" [1].
- A BoM (Bill of Materials, the full list of parts that go into a product) for a laptop or server has hundreds of parts, which come through many layers of suppliers. A procuring officer cannot easily check where each part was made.
-
So a firm can over-claim, for example by calling an imported, ready-made mainboard "locally assembled". If nobody complains, it may never be caught.
-
Checking depends on rivals complaining
- Oversight runs through a Standing Committee set up under the PPP-MII Order. It deals with grievances in grievance-redressal and sector-specific meetings [2].
- This means checks usually start only after a competing bidder complains. They do not happen routinely before the contract is given.
-
A small Indian firm that loses a tender has the most reason to complain, but the least money and time to fight a long dispute.
-
The most important weights are not yet in numbers
- The release says in-house R&D gets "adequate" weightage, and Indian design and IPR get "additional" weightage [1]. It gives no percentage for either.
- Until the exact numbers are published, firms cannot plan their investment, and procuring officers cannot check claims the same way every time. This is the inconsistency that the standardised format was meant to remove [1].
- The 6-month gap before the rule applies [1] is the time to publish these numbers.
9. The Costliest Part of a Laptop Still Comes From Abroad
- The rule gives credit for the steps around the chip, not for the chip itself
- Credited steps include SMT mainboard assembly, bare PCB, RAM and SSD assembly, testing and packaging, display assembly, chassis, power module and final assembly [1].
- Making the processor chip itself is not on that list [1]. For RAM and SSD, India gets credit for assembly, testing and packaging, not for making the memory chip.
-
So even a laptop with a high DVA score can still import its single most valuable part.
-
Why this still matters, and where it stops
- Packaging and testing are real steps up from screwdriver assembly. They are the stages the India Semiconductor Mission is trying to bring home.
- But a high DVA score should not be read as "technologically independent". For servers in critical government systems, the processor is still a foreign dependency that this rule does not touch.
10. Will Government Pay More for Local Hardware?
- The strongest objection
- Government buys with taxpayers' money. If local-content preference cuts out cheaper or better imported servers and PCs, offices pay more, or get fewer bids.
- The domestic supply base for IT hardware is still small. The PLI 2.0 scheme for IT hardware had produced ₹10,000 crore of output and 3,900 jobs in its first 18 months [4]. The same release expects ₹3.5 lakh crore of production and 47,000 jobs over the scheme's life [4]. Most of that capacity does not exist yet.
-
A stricter, process-based test could therefore shrink the pool of qualifying suppliers even further, at least at first.
-
What is right about it
-
For complex items like servers, the risk of fewer bidders and higher prices is real, especially in the first few tender cycles.
-
Why the policy still holds up
- The 6-month lead time [1] gives suppliers time to rework their BoMs and qualify before the rule applies.
- Government is a steady, large buyer. Assured orders are exactly what lets a new factory grow to an efficient size. A subsidy alone cannot guarantee that.
- The fair test is the result: if bid prices and the number of bidders on GeM get worse after the rule applies, the weights need to be adjusted. If they hold steady, the cost was worth paying.
11. How the Buyer Rule Works With the PLI Subsidy
- Two tools, one aim: one pays makers, the other buys from them
- PLI 2.0 for IT hardware (PLI means Production Linked Incentive, a cash reward linked to higher production) has a ₹17,000 crore budget. It covers laptops, tablets, all-in-one PCs, servers and ultra-small form factor devices [3].
- The DVA rule covers almost the same items: desktops/AIO PCs, laptops and servers [1].
-
PLI helps on the supply side. Procurement preference creates demand. Together, a firm gets both money to set up and a buyer for what it makes.
-
The risk is that the two give different signals
- The DVA rule now rewards depth: PCB, SMT, packaging, design [1].
- If incentives under PLI mainly follow how much a firm sells, a firm can earn PLI money through simple assembly while scoring low on DVA. Investors then get mixed messages.
- MeitY runs both, so it should check that what PLI rewards matches the DVA weights.
12. Why India Can Do This Without Breaking WTO Rules
- India has not signed the main WTO procurement treaty
- The WTO Government Procurement Agreement (GPA) requires its parties to treat foreign suppliers equally in government tenders. India is only an observer (it attends meetings but is not bound) [5].
-
This answers the doubt raised in the note. India is free to prefer local suppliers in government purchases because it has not joined the GPA [5].
-
But this freedom is shrinking with trade deals
- When India opens government procurement to a partner in a trade agreement, preference rules like this one have to fit inside that deal.
- That is why the definition of "local" (the DVA method) matters. A clear, value-based test is easier to defend in trade negotiations than a blanket ban on imports.
13. What MeitY Should Do Before the Rule Starts
- MeitY should publish the R&D and design weights as numbers
-
At present they are only "adequate" and "additional" [1]. Fixed percentages make claims checkable and stop each office from reading them differently.
-
MeitY and GeM should check claims at random, not only after complaints
- Today, checking mostly begins when a rival complains to the Standing Committee [2].
-
Random checks of BoMs, plus a public list of firms whose false declarations were caught, would make self-certification believable.
-
MeitY should track what the rule does to prices and bids
- It should compare bid prices and the number of bidders for the 6 products before and after the rule takes effect, and share the results with the Standing Committee [2].
-
That gives the government evidence to raise or relax the weights. Otherwise it is only guessing.
-
MeitY should link the DVA rule to PLI 2.0
- Firms receiving PLI money [3] should be pushed to reach the same deeper DVA steps, so that the subsidy and the procurement rule pull in one direction.
14. Anchors for Answers
- Data: PLI 2.0 for IT hardware has a ₹17,000 crore outlay and covers laptops, tablets, AIO PCs, servers and ultra-small form factor devices [3]
- Data: PLI IT hardware produced ₹10,000 crore of output and 3,900 jobs in 18 months. It expects ₹3.5 lakh crore of production and 47,000 jobs [4]
- Report/Committee: Standing Committee under the PPP-MII Order, which oversees implementation and resolves grievances [2]
- Law/Case: Rule 153(iii), General Financial Rules 2017, the legal basis of the PPP-MII Order [2]
- Comparison: WTO Government Procurement Agreement: its parties must give foreign suppliers equal access to tenders. India is only an observer, so it keeps room for local-content preference [5]
- Scheme: PLI 2.0 for IT hardware gives supply-side cash support, and the DVA-based procurement preference gives demand-side support for the same products [3]
15. Mains Relevance
- GS-III: Indian economy (industrial policy and its effect on industrial growth); planning, mobilisation of resources, growth and employment; science and technology (indigenisation of technology).
- GS-II: Government policies and interventions for development; transparency and accountability in governance (public procurement).
- Possible question stems: 1. "Moving from 'final-assembly' to 'process-based' value addition is key to deepening India's electronics manufacturing ecosystem." Discuss, with reference to recent changes in public procurement norms. 2. Examine how public procurement can be used as a tool of industrial policy in India. What are its limits? 3. "Rewarding design and IPR, not just assembly, is the next frontier of Make in India." Critically analyse.
16. Related Topics to Study Next
- General Financial Rules, 2017: Rule 153(iii) is the legal basis of the PPP-MII Order.
- PLI Scheme for IT Hardware and Large-Scale Electronics: a supply-side incentive that complements procurement preference on the demand side.
- India Semiconductor Mission: RAM/SSD and display assembly crediting ties into chip and display fabs.
- GeM (Government e-Marketplace): the main platform through which local-content preferences are applied.
- WTO Government Procurement Agreement and national treatment: the trade-law constraints on preference policies.
- National Policy on Electronics, 2019: the overall target framework for electronics system design and manufacturing (ESDM).
- Restrictions on bidders from land-border-sharing countries (GFR, 2020): a parallel procurement safeguard.
- Phased Manufacturing Programme (PMP): the earlier phased approach to deepening localisation of mobile phones.
17. NCERT Concepts to Revise
- Public Procurement (Make in India) Order, 2017 (Polity): The parent order whose local-supplier preference depends on the DVA test being revised here.
- Local content requirement (Economy): DVA is the value-based way of measuring local content, and WTO rules limit such requirements.
- Value added (Economy): Domestic value addition is the share of value created in India; this explains how it is calculated.
- General Financial Rules (Economy): Rule 153(iii) of the GFR is the legal basis of the procurement preference order.
- Make in India (Economy): The revision aims to deepen domestic manufacturing under this flagship initiative.
- Production-linked incentive (Economy): PLI 2.0 for IT hardware is the supply-side partner to this demand-side procurement preference.
- Phased manufacturing programme (Economy): An earlier approach to raising domestic value addition step by step, similar in logic to this rule.
- Government e-Marketplace (Polity): GeM is the main platform where local-content preferences are applied in government buying.
- Intellectual property rights (Economy): The new method gives extra weightage to Indian design and IPR, not just assembly.
- World Trade Organization (History): WTO procurement rules and India's non-membership of the GPA decide how far local preference can go.
- Printed circuit board (Geography): Using domestically made bare PCBs earns DVA credit under the new process-based method.
- India Semiconductor Mission (Geography): Credit for RAM/SSD assembly, testing and packaging links to India's chip-making ambitions.
- Industrial policy (Economy): Procurement preference is an industrial policy tool, and the note discusses its use and limits.
- Ministry of Electronics and Information Technology (Polity): MeitY is the nodal ministry that issued the revised DVA methodology.
18. Common Errors / Trap Areas
- The year of the Order: the headline says "Order 2020", but the Order is from 2017. 07 Sep 2020 is the date of MeitY's DVA methodology. [1][2]
- Which ministry: the PPP-MII Order is a GoI/Commerce framework [2], but the product-specific DVA methodology is notified by the nodal ministry, MeitY. [1]
- Effective date: the revision does not apply immediately. It applies 6 months after Gazette publication. [1]
- R&D vs design/IPR weightage: R&D gets "adequate" weightage and design/IPR get "additional" weightage. Do not swap them. [1]
- Local Content vs DVA: these are not two separate tests. DVA is the value-based measure of local content. [1]
- Class-I and Class-II supplier thresholds (the percentage cut-offs) could not be verified from whitelisted sources in this search. Confirm them from the latest DPIIT order text before memorising.
Sources
- 1Press Release Page | Press Information Bureau (MeitY revision of DVA methodology for 6 IT-hardware products, 20 Nov 2026; user-supplied digest)pib.gov.in · tier 1
- 2Ministry of Commerce & Industry, PIB release on PPP-MII Order (GFR Rule 153(iii), amendment of 28.05.2018)pib.gov.in · tier 1
- 3Ministry of Electronics & IT, PIB release: Cabinet approves PLI Scheme 2.0 for IT Hardware (₹17,000 crore outlay)pib.gov.in · tier 1
- 4Ministry of Electronics & IT, PIB release: PLI IT Hardware progress (₹10,000 crore production, 3,900 jobs in 18 months)pib.gov.in · tier 1
- 5WTO: Agreement on Government Procurement, parties, observers and accessionswto.org · tier 2